Installation And Operation; Instructions For The Installer; Installation Instructions - Bartscher M 10110g Manual De Instrucciones

5. Installation and operation

5.1 Instructions for the installer

CAUTION!
Any operation related to installation, assembly, operation and maintenance
must be performed by the specialized personnel who has appropriate
qualifications (manufacturer' or seller's authorisation). The required activities
need to be performed while taking into account the installation regulations
valid in a given country as well as the product safety legislation and health
and safety regulations.

5.1.1 Installation instructions

•
Before the installation and the use of the device, read carefully these operating
instructions.
•
Defective installation, mistakes during the operation, conservation and cleaning, as
well as possible changes and modifications may cause improper operation, damages
and injuries.
•
Manufacturer will not assume any liability for personal injuries or material damages
resulting from the failure to observe the aforementioned regulations or tampering
with single components of the device or using non-original spare parts.
•
Immediately after receiving the device, make sure that it has not been damaged in
transit, and that the packaging is not damaged. In the case of damage or missing
components, immediately notify the shipper or vendor/manufacturer providing the
code-no. and serial numbers (nameplate is on the back of the unit) and attaching
photo evidence.
•
Make sure that there are no obstacles on the path to the installation site limiting
access through doors, corridors or other communication routes.
•
NOTE: During the transport of the device, it may turn over, which might result in the
damage to the device itself or other objects or in personal injuries. During the
device's transport, use the measures appropriate for its weight. The device should
not be pulled or tipped, but lifted perpendicularly to the floor and moved horizontally.
- 52 -