Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Problem
Machine does not turn on.
On/Stand-by warning lamp OFF.
The machine will not switch on
after the "On/Stand-by" button
is pressed.
Excessive heating time
(i.e. more than 40 seconds).
20
TROUBLESHOOTING
Possible causes
» The machine is not connected
to the power source.
» The machine is connected to a
faulty power cord.
» Power supply not available in
the household mains.
» The touch interface fails to
respond.
» Wrong simultaneous press of
two buttons.
» The machine is stored at low
temperatures
(e.g. in a cellar or garage).
Solution
» Connected the machine to the
power source.
» Connected the machine directly
to the power source.
» Connect another device to
check the availability of the
power supply.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE.
» Verify that the interface surface
and the user's hands are clean
and dry.
» Wait a few seconds, then press
the "On / Stand-by"
only.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE
» Keep the machine in a suitable
place over at least 1 hour.
Then, plug the machine into the
mains socket and try to switch
it on.
IF THE PROBLEM CANNOT
BE SOLVED, CONTACT
THE LAVAZZA CUSTOMER
SERVICE
button
Publicidad
Tabla de contenido
