Troubleshooting; Corrective Action; Warranty - Kobalt K13RS-03 Manual De Instrucciones

TROUBLESHOOTING

WARNING
• Turn the switch to the "OFF" position and disconnect the plug from the power source before
performing troubleshooting procedures.
PROBLEM
Blade binds, jams, or
burns the wood.
Blade cannot be
removed.
Saw vibrates or
shakes.

WARRANTY

This saw is warranted to the original purchaser from the original purchase date for five (5)
years subject to the warranty coverage described herein.
This saw is warranted for the original user to be free from defects in material andworkmanship.
If you believe the saw is defective at any time during the specified warranty period, simply
return the saw along with proof of purchase to the place of purchase for a free replacement or
refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs
or alterations which have been made or attempted by others or the unauthorized use of
nonconforming parts; the damage is due to normal wear, damage is due to abuse (including
overloading of the tool beyond capacity), improper maintenance, neglect or accident; or the
damage is due to the use of the tool after partial failure or use with improper accessories or
unauthorized repair or alteration.
This warranty excludes accessories.
This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
1. Improper operation.
2. Dull blade.
3. Improper blade.
Saw dust in the blade
clamp slot.
1. Improper blade.
2. Improper operation of
installing blade.
14

CORRECTIVE ACTION

1. See "OPERATING
INSTRUCTIONS" section.
2. Replace or sharpen blade.
3. Replace blade.
Clean the blade clamp slot with a
brush.
1. Replace blade.
2. Remove the blade and reinstall it.
L G Sourcing, Inc., N. Wilkesboro, NC 28659
Printed in China