Electrical Installation - Thermador Masterpiece Serie Instrucciones De Instalación

Electrical installation

Electrical requirements
Power Supply
Electrical connection
10
3.8" (96mm) + Fitting/Conduit 0.9" (23mm)
12" (300mm) Approximate
J" box
You can find the identification plate with the electrical specifications on the underside
of the appliance. The junctionbox must be located within 3 feet of the cooktop
connection. It should be easily accessible for service purposes.
Model
240 V AC, 60 Hz system:
circuit breaker
CEM304FS 40 Amp
CET304FS 40 Amp
CES304FS 40 Amp
CEM365FS 40 Amp
CET366FS 50 Amp
CES366FS 50 Amp
CES365FS 50 Amp
CAUTION: Before installing, switch off the circuit breaker in the fuse box.
Lock circuit breaker to prevent power from being turned on accidently.
The branch circuit breakers ampacity , the wire sizes and the connections must be
conform to the requirements of the National Electrical Code or Canadian Electrical
Code and all local codes and ordinances.
Attach flexible conduit to the junction box.
:
WARNING To reduce the risk of electric shock and fire, do not use a
flexible power supply cord.
Conduit approx.
3 feet (~900mm)
208 V AC, 60 Hz system:
circuit breaker
30 Amp
30 Amp
30 Amp
40 Amp
40 Amp
40 Amp
40 Amp