Adjusting Engine Idling Speed; Throttle Free Play Adjustment; Adjusting Brake Levers; (Condition And Wear) - Malaguti F10 Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para F10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5.7

ADJUSTING ENGINE IDLING SPEED


For possible adjustments, please contact an
Authorised MALAGUTI Service Centre.
2
3
5.8

THROTTLE FREE PLAY ADJUSTMENT

4
Check that the throttle grip idle stroke is ‑3 mm
(measured on the end of the throttle grip).
5
Any adjustments must be entrusted to an
Authorised MALAGUTI Service Centre.
6
5.9

ADJUSTING BRAKE LEVERS

Maintenance of the brake levers is limited to the brake
fluid level check (sec. 5.4).
A soft feeling in the brake levers could indicate
the presence of air in the hydraulic circuit. In
ENG
this event, refer to an Authorised MALAGUTI
Service Centre for a check and circuit purging, if
necessary.
28
All manuals and user guides at all-guides.com
5.10 CHECKING PADS AND DISCS OF BRAKES

(condition and wear)

We recommend that you check the pads and discs
every 2.000 km (,250 mi).
Check the thickness of the brake pads as described
in Fig.21. The minimum thickness of the brake lining
shall not be less than 2 mm (Fig.22).
If the thickness of the pads is close to the lowest
permitted limit or if they are damaged, have them
replaced immediately.
It is absolutely necessary to replace the worn
discs and pads as soon as possible. This operation
must be performed by an Authorised MALAGUTI
Service Centre using only original MALAGUTI
spare parts.
Fig.21
MIN. 2mm
Fig.22

Publicidad

Tabla de contenido
loading

Tabla de contenido