Multifunction Button; Terminating Charging And Acknowledging Faults; Restarting Residual Current Devices And Miniature Circuit Breakers - Mennekes AMTRON Xtra Serie Manual De Instrucciones

5.5 Multifunction button

Only available for the equipment variants Xtra R, Xtra,
Premium R, Premium W and Premium.

5.5.1 Terminating charging and acknowledging faults

Fig.: 12. Terminating charging and acknowledging faults
Terminating a running charging process (only for devices
without authorization) and acknowledging faults.
f Press the multifunction button (about 10 mm).
9 The charging process is terminated and the charging
plug in the device is unlocked.
22
5.5.2 Restarting residual current devices and miniature
circuit breakers
Fig.: 13. Restarting
The residual current device and the miniature circuit break-
er in the device can be manually switched on again from
outside via the multifunction button, without opening the
housing.
f Press the multifunction button up to the end position
(> 15 mm).
9 Residual current device and miniature circuit breaker
are switched on again.