Intermittence Cycle And Excess Temperature - Stel TIG μP 203H-353H AC/DC Manual De Instrucciones

ENGLISH
TIG µP 203H-353H AC/DC
COD. 6902500070
7.3 INTERMITTENCE CYCLE (ED) AND EXCESS
TEMPERATURE
The intermittence cycle is the percentage of use of the welding machine in 10
minutes which the operator must respect so as to avoid blocking of the power
supply due to excess temperature.
If the machine goes into excess temperature :

the yellow led (ref. 3 page 9) lights up.

it is necessary to wait about 10 minutes before resuming welding.

the welding current or the work cycle must be reduced to avoid further
blocking of the power supply.
100% ED (ciclo intermittenza)
100% ED (intermittence cycle)
Saldatura continua
60% ED (intermittence cycle)
60% ED (ciclo intermittenza)
10 minuti
10 minutes
6 minuti saldatura
Weld 6 minutes
35% ED (ciclo intermittenza)
35% ED (intermittence cycle)
10 minuti
10 minutes
3.5 minuti saldatura
Weld 3.5 minutes
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
FIGURES
10 minutes 10 minuti
Continuous weld
10 minuti
10 minutes
4 minuti attesa
Wait 4 minutes
10 minuti
10 minutes
6.5 minuti attesa
Wait 6.5 minutes
ENGLISH
7.3 INTERMITTENCE CYCLE (ED) AND EXCESS
TEMPERATURE
The intermittence cycle is the percentage of use of the welding machine in 10
minutes which the operator must respect so as to avoid blocking of the power
supply due to excess temperature.
If the machine goes into excess temperature :

the yellow led (ref. 3 page 9) lights up.

it is necessary to wait about 10 minutes before resuming welding.

the welding current or the work cycle must be reduced to avoid further
blocking of the power supply.
6 minuti saldatura
3.5 minuti saldatura
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
69 http: www.stelgroup.it
TIG µP 203H-353H AC/DC
COD. 6902500070
100% ED (ciclo intermittenza)
100% ED (intermittence cycle)
10 minutes 10 minuti
Saldatura continua
Continuous weld
60% ED (intermittence cycle)
60% ED (ciclo intermittenza)
10 minuti
10 minutes
4 minuti attesa
Weld 6 minutes
Wait 4 minutes
35% ED (ciclo intermittenza)
35% ED (intermittence cycle)
10 minuti
10 minutes
6.5 minuti attesa
Wait 6.5 minutes
Weld 3.5 minutes
FIGURES
10 minuti
10 minutes
10 minuti
10 minutes
69