Setup 1; Intellistand - Avaya AWH75 Manual Del Usuario

Setup 3
w/AVAYA 8403, 8405, 8410D, 8411D, 8434 telephones
Configuration
dial set to 3
* Optional.
The 8400 cable is not
delivered with the product;
call the Avaya Headset Line
to obtain: 1 800 544-4779.
Setup 4
with AVAYA 1600 and 9600 series telephones
Configuration
dial set to 1
8
Setup 5
with other AVAYA telephones
Warning: It is important for correct and safe operation that the base cord
is installed into the proper jack of your telephone. Follow these instructions
carefully, especially if your telephone has two jacks where the handset was
attached. Be sure to note or mark which jack was used for the handset.
Configuration
Dial
{see page 14}
Optional
Lifter

IntelliStand

™
IntelliStand
off
IntelliStand
on
Optional
Lifter
Be sure to connect
this plug into the
jack where the
handset was
connected.
Optional
Lifter
™
Set the IntelliStand
switch to IntelliStand off
–
( ) if you want to control
the handset lifter with
the call control button
on your headset.
Set the IntelliStand
switch to IntelliStand on
=
( ) if you want the
handset to automatically
pick up when you take
the headset off the
charging cradle.
9