Attachment Unit Locking Lever; Driving; Adjusting The Handlebar Position - Rapid Mondo 1550 Manual De Instrucciones

4.10

Attachment unit locking lever

5

Driving

EN
5.1

Adjusting the handlebar position

118
The attachment unit lock locks the coupled attachment unit by means of the bolt.
By actuating the attachment unit locking lever, the bolt releases the lock. In this condition
the attachment unit can be coupled or uncoupled.
The machine can suddenly trap the user or third persons, cause them to fall over or run
them over.
• Coupling and uncoupling attachment units may only be done when the engine is turned
off.
• After coupling attachment units, check whether the attachment unit locking bolt is
engaged and the attachment unit is connected to the machine.
Bolt engaged
It is assumed that you have read and understood the chapters "First things first" and "Safe
operation".
For ergonomic working with the machine, the handlebar height must be adjusted before
commencing work.
Tilting the handlebar may be helpful when working along hedges or buildings.
Warning
Bolt not engaged
Note
Machine no. from CI 1001