Safety Instructions; Application; Maintenance - Beyerdynamic DT 700 PRO X Manual

Thank you for selecting the dynamic DT 700 PRO X
premium studio headphones with STELLAR.45 drivers
from beyerdynamic.
Please take some time to read carefully through this
information before using the product.
ENJOY THE SOUND!
Your beyerdynamic PRO X Team

SAFETY INSTRUCTIONS

Risk of injury
u
We would like to point out that excessively high
volumes and long listening times may cause hearing
damage. Hearing defects always constitute an
irreversible impairment of hearing ability. If you suffer
from tinnitus, do not use headphones or reduce the
volume.
u
According to regulations to protect employees
against damages caused by noise and vibrations,
please follow these instructions:
85 dB SPL for max. 8 hours
88 dB SPL for max. 4 hours
91 dB SPL for max. 2 hours
94 dB SPL for max. 1 hour
97 dB SPL for max. 30 minutes
100 dB SPL for max. 15 minutes
u
When connecting the headphones, please ensure
that the volume is turned down to minimum. Adjust
the volume after putting on the headphones.
Danger to life
u
Headphones drastically reduce perception of
external sounds. Using headphones in road traffic
can be potentially dangerous. The user's hearing
must not be impaired to the extent that it causes
road safety risks. Please also make sure that you do
not use the headphones in traffic, especially within
an area of potentially dangerous machines and
tools.
u
Furthermore, avoid using headphones in situations
where hearing must not be affected, especially
when crossing a railway crossing or at a
construction site.
Liability / intended use
u
Do not use the product for any application which is
not described in this product information.
u
beyerdynamic is not liable for improper use of the
product and its accessories.

APPLICATION

With the closed DT 700 PRO X, beyerdynamic presents a
pair of circumaural studio headphones that are
suitable for professional recording and monitoring in
the studio as well as on the road. This is enabled by the
STELLAR.45 driver, developed in Heilbronn, which
reproduces the best studio-quality sound loudly and
powerfully on all playback devices. Whether on an
interface, laptop, tablet or mobile phone, there are no
limits to creativity.
The detachable mini-XLR cable can be replaced by
cables of different lengths and connection options.
The rugged spring steel headband construction gives
the over-ear headphones a secure fit and ensures
durability. The supple velour ear pads are soft to touch,
as you would expect, and ensure comfortable air
circulation. Thanks to soft memory foam, the headband
adapts ergonomically to the shape of the head and,
like the ear pads, it can be replaced when necessary.
Robust and high-quality materials complete these
headphones, which are handmade in Germany.

MAINTENANCE

u
As with any equipment which will be used in close
proximity to sensitive areas of the body, it is essential
that the ear pads and headband are kept clean.
Use a damp cloth for cleaning using warm water
only taking care not to allow any water drops into
the ear cups or transducers.
u
If necessary, you can carefully remove the ear pads
and headband pad and clean them with mild soapy
water.
u
WARNING: Never use any solvent cleaning agents!
Furthermore, the pads must be completely dry
before they are attached to the headphone again.
u
WARNING: Never use a vacuum cleaner for cleaning
the headphones, as this may cause irreparable
damage.
u
Should it become necessary to replace the ear pads
or the headband pad, refer to "Replacement parts
and Accessories". You can easily do this yourself.
u
If other components have to be replaced, please
contact your local beyerdynamic representative.
3