Alpine CVA-1014 Manual Del Usuario página 49

Indication for SAT Radio Receiver Mode
ANTENNA
• The XM or SIRIUS antenna is not connected to the XM
or SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is
attached securely to the XM or SIRIUS radio module.
UPDATING (XM mode)
(SIRIUS mode)
CALL 888-539-
SIRIUS TO
SUBSCRIBE
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
NO SIGNAL
(XM mode: Monitor)
NO SIGNL
(XM mode: Sub-display)
ACQUIRING (SIRIUS mode)
• XM or SIRIUS signal is too weak at the current
location.
- Wait until the car reaches a location with a stronger
signal.
LOADING (XM mode)
ACQUIRING (SIRIUS mode)
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
OFF AIR (XM mode)
INVALID CHANNEL
• The channel currently selected has stopped
broadcasting.
- Select another channel.
– – – – – – – – – – (XM mode: Monitor)
– – – – (XM mode: Sub-display)
INVALID CHANNEL
• The user has selected a Channel Number that does not
exist or is not subscribed to.
- The unit will revert back to the previously selected
channel.
All manuals and user guides at all-guides.com
(SIRIUS mode)
(SIRIUS mode)
Information
• There is no artist name, song/program title, or Auxiliary
Data Field associated with the channel at that time.
- No action needed.
CAP IO CAP NVM
(Displayed in place of Channel Name when the power is turned on.)
• The unit is out of order.
- Consult your ALPINE dealer.
Indication for CD Changer
HI-TEMP
(Monitor)
HI TEMP
(Sub-display)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
ERROR - 01
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
ERROR - 02
• A disc is left inside the CD changer.
- Press the EJECT button to activate the eject function.
When the CD changer finishes the eject function,
insert an empty CD magazine into the CD changer to
receive the disc left inside the CD changer.
NO MAGAZINE
(Monitor)
NO MAGZN
(Sub-display)
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
• No indicated disc.
- Choose another disc.
(XM mode)
47
-EN