Components of your camera
Your camera has the following components:
7C_Eng.indd
9
All manuals and user guides at all-guides.com
1. Cover dome: Covers the inner cover, lens, and main
2. Inner cover: Covers the main body to protect it.
3. Wing locker: Push a long thin screwdriver into its
4. Main body: Includes a lens, a switch board, a PCB
5. Mount bracket: Used as a ceiling or wall fixture. It
6. Ceiling mount opener: Remove it for line connection
7. Zoom lever: Using this lever, the lens zoom can be
8. Focus lever: The lens focus can be adjusted by
9. Tilt fixing screw: Using this screw, the slope of the
10. Switch board: Includes two kinds of control switches
11. Groove mark: To attach the Main body to the Mount
12. Locker: Used to open or close the Cover dome. To
13. Lock releaser: Push it outward and rotate the main
14. Cable: Connect the Video connector to BNC cable
body to protect them.
narrow spot and press it outward when you want to
remove the inner cover.
board, screws, and such.
is fixed using three long tab screws provided in the
package.
to the ceiling when it is installed on the ceiling.
adjusted and fixed.
rotating it left or right. Rotate it clockwise for fixing.
lens can be adjusted and fixed.
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
bracket, align this groove mark on the Main body with
the wide groove in the CAMERA FRONT side on the
Mount bracket.
open the cover dome, press the locker.
body in UNLOCK direction when you want to remove
the Mount bracket from the Main body or to remove
the installed camera from the Mount bracket.
and Power connector to power adapter.
9
2007-08-06