Publicidad
Idiomas disponibles
Idiomas disponibles
Possible combinations
The K 303/K 303-1 catalyser may only
be combined with the following Miele
ovens and cookers:
H 331, H 341
H 334, H 344
H 353, H 363
H 355, H 365
H 357
Fitting instructions
The catalyser must only be fitted by
a suitably qualified and competent
person. Faulty installation could ex-
pose the user to considerable dan-
ger.
The necessary connection data and
model name are located on the
catalyser packaging.
The connection data must correspond
to the voltage and frequency of the
household electricity supply and of the
oven/cooker.
After fitting the catalyser
The oven/cooker must be tested in ac-
cordance with local and national safety
regulations.
All manuals and user guides at all-guides.com
Service engineer fitting instructions
Installation and connection
Turn off the mains electricity supply.
^ Remove the oven door.
^ Pull the oven/cooker out of its niche.
^ Unscrew the upper housing cover
and the electrical connection cover
plate.
^ Pull the vent duct retaining bracket
out of its holder.
Removing the support panels around
the appliance's built-in components
makes it easier to fit the catalyser. The
plug connector for the electrical con-
nection of the catalyser will be more ac-
cessible.
73
Publicidad
Capítulos
