Miele K 303 Instrucciones Para El Montaje página 77

^ Secure the connection cable sup-
plied d to the temperature regulator
c.
^ Fit the temperature regulator in the
opening provided in the vent duct.
^ Use the coil spring to secure the vent
duct together with the temperature
regulator.
Finally, the electrical connectors must
be fitted to the catalyser.
All manuals and user guides at all-guides.com
Service engineer fitting instructions
^ Connection cable d: secure to one
end of catalyser heater element a.
The other two connection cables used
to connect the catalyser are located in
their storage position beside the vent
duct.
^ Connect cables 1 and 2 to the tem-
perature regulator and to the remain-
ing free catalyser heater element
end.
Secure the cable to the temperature
regulator with the angled connector.
77