Assembly Instructions; Tools Needed - DieHard DH-200M Manual Del Usuario

8.2
the outlet, have a proper grounded outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock or electrocution.
NOTE: Pursuant to Canadian Regulations, use of an adapter plug is not
allowed in Canada. Use of an adapter plug in the United States is not
recommended and should not be used.
8.3 Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less - use a 14 gauge (AWG) [2 mm
extension cord.
• Over 100 feet (30.5 meters) long - use a 10 gauge (AWG) [5.3 mm
extension cord.
9.

ASSEMBLY INSTRUCTIONS

9.1 It is important to fully assemble your charger before use. Remove all cord
wraps and uncoil the cables prior to using the battery charger. Follow these
instructions for assembly.
(2) 10-32, thread cutting screws
(4) ¼-20, thread cutting screws
(4) Phillips head sheet metal screws
(2) wheels
(1) axle
(2) axle caps
(2) axle brackets
(1) handle
(1) foot
9.2 Attach the foot:
upside down on a flat surface. Attach the foot and secure it with the four ¼-20
thread cutting screws provided.
Never alter the AC cord or plug provided – if it does not fit
PARTS
Remove the charger from the packing materials and place

TOOLS NEEDED

3/8" wrench (for mounting foot)
5/16" wrench (for mounting wheels)
Hammer
Screwdriver (flat blade)
Screwdriver (Phillips)
7
• •
]
2
]
2