GB
INSTRUCTIONS FOR ASSEMBLY AND USE
1: To open the pushchair chassis, release the folding catch A,lift the handlebar upward and make sure it
locks into the correct position as shown in Pic. 2
2: Insert the wheel into the plastic base to assemble the front wheels. To detach the front wheels, press
the button under the plastic base and pull the wheel outwards.
3: Push the rear wheel set into the corresponding hole and push until you hear it click into place.
4: Press the button to release the rear wheel.
5: Insert the plastic parts into the base to assemble the convertible hammock structure.
6: Adjust the upholstery and fasten the buttons.
7: Insert the bumper bar into the plastic base until you hear it click as shown in picture A. To release,
press the button and pull outward.
DO NOT USE THE FRONT BUMPER BAR AS A CARRY HANDLE!
8: To fit the hood, insert the slots at the edge of the hood into the guides on the sides of the frame.
9: Carrycot after unfolding.
10: To attach the carrycot, position it on the chassis and push it downwards until you hear it click.
11: Chassis unfolded in carrycot position.
12: Press button A on both sides to adjust the height of the handlebar.
13: To lock the front swivel wheels, press the locking lever downwards. To unlock the front swivel wheels,
lift the lever up.
14: To engage the brake, push the brake bar down. To release, lift the brake bar.
15: Press the button on both sides to adjust the height of the footrest.
16: Press button A to release the buckle.
17: CONVERTIBLE SEAT / CARRYCOT:
CARRYCOT POSITION: Press the buttons on both sides of the seat downwards to position A to turn the
seat into the carrycot position and press the lever shown in picture 20 down until you hear it click and the
backrest is completely horizontal.
SEAT POSITION: Raise the buttons on both sides to position B and press the lever shown in picture 20
upwards, to turn the carrycot back into a seat.
Extract the 5 points of the harness, removing all the buckles through the slots in the rear part of the
backrest. To turn the carrycot back into a hammock, follow the same steps in reverse order.
18: Carrycot in seat position.
19: Press the lever on the backrest to regulate and adjust the position of the backrest upwards or downwards.
20. To detach the convertible seat, simultaneously pull the unlocking levers situated on both sides and
lift. What's more, the hammock is reversible so it can be positioned facing you or facing forwards.
21: To fold the chassis, press the button on the right side, then pull the locks on both sides upward, and
push the handlebar downwards. The folding catch will automatically engage.
22:Chassis after folding.
MAINTENANCE
-Wash the plastic parts in warm soapy water. Afterwards, carefully dry all the components.
-The cover can easily be removed for washing.
-Wash by hand and at a temperature never above 30ºC. Dry naturally in a shaded place.
-Prolonged exposure of the cover to sunlight may affect the stability of the fabric colour.
GUARANTEE INFORMATION
This article is guaranteed in accordance with R.D. 1/2007 of 16th November. Keep your receipt as proof of purchase, you need to
show it at the store where you purchased the product to prove validity in the event of any type of claim. This guarantee does
not cover any faults or breakages caused by misuse of the article or by not following the safety and maintenance information
listed in the instructions and on the care labels.
IM 2022 PLEAT CONVERT BECOOL ins.indd 17
All manuals and user guides at all-guides.com
17
20/11/17 11:39