Ferroli ECOTRONIC HiTech Manual Del Usuario página 147

ECOTRONIC HiTech
» Open the terminal cover.
» Uncover the cables by a max. 55
mm, fasten the strengthening bands,
strip the last 8-9 mm of the wires
» Open the terminals with a suitable
screwdriver and connect the electri-
cal system to the controller.
» Close the cover and secure with the
screw.
» Activate the mains power supply and
start up the controller.
code 3542A420 - Rev. 00 - 12/2021
MAX 55
8÷9
3
1
2
EN 147