ECOTRONIC HiTech
2.2 Amount of heat
Display, in kWh, of the amount of heat produced by the system.
This is an approximate value.
2.3 Graphic overview
Shows a clear illustration of the data as a bar chart. Different time bands are available for com-
parison. The page can be scrolled with the two buttons on the left.
2.4 Notifications
Display of the last 20 errors in the system with indication of date and time.
2.5 Reset/clear
Reset and clear the selected statistics. Selecting "all statistics" deletes everything except mes-
sages.
3. OPERATING MODE
Exit operating mode
3.1.Auto
3.2.Manual
3.1 Auto
Automatic is the controller's standard operating mode. Only the automatic mode guarantees
correct operation, taking into account the current temperatures and the parameters that have
been set! After a power outage the controller automatically returns to the last operation mode
selected.
3.2 Manual
The individual relay outputs and connected components can be checked for correct operation
and connection.
info
code 3542A420 - Rev. 00 - 12/2021
EN
153