Set Up And Assembly - TOUGHBUILT TB-H2-LM-165-BT Instrucciones De Funcionamiento

4.
To set up the tool:
• Inspect the box for damage.
• Remove the box's contents and lay everything
on a flat, clean and dry surface. Check the
contents against the packaging list and
familiarize yourself with their names.
• Write the requested information on the
Registration Form at the end of the manual.
Keep this information at a safe location.
When contacting ToughBuilt
Inc. for assistance, or for possible
warranty claims, the information on the
registration form will be required.
• Keep the box for storing the instrument.
• Read, study and familiarize yourself with
all aspects of this manual before attempting
to power the unit on.
• The work area should be clear of obstructions.
• Any surface where the Laser Measurer is to
be placed should be solid, level and stable.
• DO NOT USE IF DAMAGED.
• A tripod, pole or any other tool onto which
this Laser Measurer is mounted
should be able to support the Measurer's
weight safely.
• When using a tripod, the legs should be
placed on a hard/solid surface to prevent
shifting or sinking. Make sure to extend
and lock all the legs, and secure the tool
to the mounting hardware. DO NOT
over-tighten the mounting screw.
• ALWAYS STAY ALERT AND USE
COMMON SENSE. Follow all safety
warnings and precautions in the manual and
on the product.
• AVOID distractions.
• Before turning the unit on, ALWAYS
familiarize yourself with the controls
and their functions before use.
• DO NOT open or dismantle the laser
unit, or attempt to make modifications to
the tool. Personal and property damage
may occur.
• DO NOT force any component to do a job.
If it does not move, there might be a reason.

SET UP AND ASSEMBLY

Industries
®
11