Fitting Outer Frame - Dovre 2020 Instrucciones De Instalacion Y Uso

F Combustible wall
G Ventilation space (minimum 15 mm)
H Fireproof ceiling
I Combustible ceiling
J Convection air opening
K Insulation (optional)
L. Fireproof base
M Combustible base
N Opening to prevent pressure build-up
O Connection pipe
P Convection air to other room

Fitting outer frame

The appliance can be supplied with a three- or four-
sided outer frame. An optional decorative frame can
also be supplied that is fitted to the outer frame.
1. Fit the outer frame by fitting the sides together
with two screws; see next figure.
2. Fit the decorative frame by joining the sides of the
frame with a connecting element and fastening it
with the two screws (A) of the connecting
element; see next figure.
3. Centre the decorative frame on the outer frame;
see next figure.
Subject to change because of technical improvements
All manuals and user guides at all-guides.com
4. Put three supports between the decorative and the
5. Attach the (assembled) frame to the appliance by
outer frame on each side; see next figure.
pushing the tabs on the vertical sides of the frame
between the appliance and the clamping plates;
see next figure.
11