Closemount-Style Fan Mounting - Harbor Breeze TILGHMAN Manual Del Usuario

CLOSEMOUNT-STYLE FAN MOUNTING

1. Remove canopy cover from bottom of canopy (B).
NOTE: It may be necessary to use the handle end of
a screwdriver (not included) to remove the canopy
cover by tapping on the canopy cover from the
inside of the canopy (B).
*Helpful Hint: Closemount-style mounting is more
suitable for ceilings lower than 8 ft. The downrod (A),
yoke cover (E) and canopy cover are not used in this
type of installation.
2. Pull wires up through hole in the middle of the
canopy (B) and attach canopy (B) to motor
housing (D) using three screws (CC) and three
lock washers (DD).
Hardware Used
CC Screw
DD
Lock Washer
All manuals and user guides at all-guides.com
x 3
x 3
10
1
2
CC
DD
Lowes.com/harborbreeze
B
Canopy
Cover