Downrod-Style Fan Mounting - Harbor Breeze TILGHMAN Manual Del Usuario

DOWNROD-STYLE FAN MOUNTING

1a.
Remove pin (M) and clip (N) from downrod (A).
1b.
Partially loosen preassembled set screws and
nuts in yoke at top of motor housing (D).
2. Insert downrod (A) through canopy (B) and yoke cover
(E). Thread wires from motor housing (D) up through
downrod (A).
3. Slip downrod (A) into yoke, align holes and
re-install pin (M) and clip (N). Tighten set screws
and then tighten nuts on the set screws. Slide yoke
cover (E) down until it rests on top of motor
housing (D).
All manuals and user guides at all-guides.com
8
1b
1a
A
N M
2
A
E
3
A
N
Lowes.com/harborbreeze
Set
Screws
and Nuts
Yoke
D
B
E
Set
Screws
and Nuts
M