Final Installation - Harbor Breeze TILGHMAN Manual Del Usuario

WIRING
3. IMPORTANT: Using a full range dimmer switch (not
included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire
or electrical shock, do NOT use a full range dimmer
switch to control fan speed.

FINAL INSTALLATION

1. Lift canopy (B) to mounting bracket (C) and align
slotted holes in canopy (B) with canopy mounting
screws (L) loosened in Step 4, page 7. Twist canopy
(B) clockwise to lock. Re-insert the two canopy
mounting screws (L) previously removed (Step 4,
page 7), then tighten all securely.
2. Align posts in blade plate (I) with holes on one side of
blade (G). Align holes in blade arm (H) with holes on
opposite side of blade (G) and then push up on blade
plate (I) until posts go through the holes in blade arm
(H). Partially insert three blade screws (AA) to attach
the blade plate (I) and blade arm (H) to the blade
(G). Then, tighten each blade screw (AA) starting
with the one in the middle. Repeat for remaining
blade assemblies.
Hardware Used
Blade Screw
AA
All manuals and user guides at all-guides.com
x 15
13
3
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
1
Downrod
Option
B
L
B
D
2
AA
H
I
Lowes.com/harborbreeze
3
2
1
Speed
Switch
Closemount
Option
L
D
G