Audio Recording - Wiseup PBC200 Guia Del Usuario

3) AUDIO RECORDING

(1) Power on the camera by holding down the Power On/Off Button for 2
seconds and the camera will enter into standby mode automatically. Both the
blue and yellow indicator lights are on. 3 seconds later, the yellow indicator
light will be turned off and the blue indicator light will be on.
(2) Press the Function Button once and the yellow indicator light will be on.
(3) Press the Power On/Off Button once and the yellow indicator light will flash
three times and then be turned off, indicating the camera is recording audio
only.
(4) Press the Power On/Off Button again to stop audio recording. The yellow
indicator light will be on.
4) MOTION DETECTION RECORDING
(1) Power on the camera by holding down the Power On/Off Button for 2
seconds and the camera will enter into standby mode automatically. Both the
blue and yellow light are on. 3 seconds later, the yellow indicator light will be
turned off and the blue one will be on.
(2) Press the Function Button once. The yellow indicator light will be on and
the blue indicator light will be off.
(3) Press the Function Button again. Both yellow and blue indicator lights will
flash three times and then be turned off. Camera will start video recording
automatically when a movement is detected.
(4) Press the Power On/Off Button once to stop motion detection mode. The
yellow and blue indicator lights will be on.
5) VIDEO/AUDIO FILE UPLOADS
(1) Connect the camera to a proper computer USB port with the USB cable
when the camera is off.
(2) The camera will be recognized as a removable disk drive.
(3) All of your video/audio files can be accessed in the DCIM folder.
6) SET THE DATE/TIME STAMP
(1) Connect your camera to a proper computer USB port with the USB cable