Dell PowerEdge FC830 Manual Del Propietário página 55

telefónica. Los daños causados por reparaciones no autorizadas por Dell no están cubiertos por la garantía. Lea y
siga las instrucciones de seguridad que se envían con el producto.
CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly,
resulting in shutdown and loss of data.
NOTE: You must remove the cooling shroud to replace a faulty cooling shroud or service other components inside the
system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Loosen the retention screw securing the cooling shroud on the cooling shroud retention bar.
2. Slide the cooling shroud to the unlock position.
3. Lift the cooling shroud away from the system.
Results
Figure 9. Removing the cooling shroud
1. slot (2)
3. retention screw
Next steps
1. Install the cooling shroud
2. Follow the procedure listed in the After working inside your system section.
Related references
Instrucciones de seguridad on page 50
2. cooling shroud
4. standoff on the cooling shroud retention bar (2)
Instalación y extracción de componentes del sled 55