Dell PowerEdge FC830 Manual Del Propietário página 82

Steps
1. Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch and lifting the end of the
latch.
2. If present, remove the connector cover from the PCIe mezzanine card bay.
CAUTION: To prevent damage to the PCIe mezzanine card, hold the card only by its edges.
3. Align the two connectors on the PCIe mezzanine card with the connectors on the system board.
4. Press down the PCIe mezzanine card until the connectors on the card completely engage with the corresponding
connectors.
The retention bracket on the side of the chassis latches onto the PCIe mezzanine card.
5. Close the retention latch.
Figure 24. Installing a PCIe mezzanine card
a. PCIe mezzanine card
b. PCIe mezzanine card connector (2)
c. PCIe mezzanine card retention latch
Next steps
Follow the procedure listed in the After working inside your system section.
Related references
Instrucciones de seguridad
Related tasks
Before working inside your system
Removing a PCIe mezzanine card
Después de trabajar en el interior de su equipo
82 Instalación y extracción de componentes del sled
on page 50
on page 51
on page 80
on page 51