U I A Unit Identification; Packaging Label - Baxi PBM-i 20 Manual Del Usuario

RECEIVING AND HANDLING THE PRODUCT
HANDLING UNPACKAGED UNITS
When the packaging has been removed:
• Remove the wooden base.
• Fit the vibration damping feet (accessories).
• handle the unit using equipment that is suitable for its
weight (forklift or crane), in compliance with the safety
standards in force (and subsequent amendments).
• Do not drag the unit as the feet may be damaged or break.
UNIT IDENTIFICATION
The heat pump can be identified from:

PACKAGING LABEL

Describes the product identification data
RATING PLATE
Describes the unit technical and performance specifications.
Shows the serial number used to uniquely identify the unit.
The serial number is also used to identify the unit's spare
parts.
If service is required, the following information must be pro-
vided to the service centre:
Model, serial number, year of production.
Installation and maintenance operations are much more
difficult if the identification plates or anything else need-
ed to clearly identify the product are tampered with,
removed or missing.
NOMENCLATURE
PBM-i 20
8 PBM 20÷40 EN
Rating plate
size
Model
I A
Hole Ø35
U I A
Packaging label