Listening To The Radio - Teac CR-H220 Manual De Usuario

1
1
2
3
4
38
3 2 4

Listening to the Radio

1 Press the TUNER/AUX 1/2 button to select
"TUNER".
2
Press the BAND button to select FM or AM.
3
If "PRESET" indicator is lit, press the TUNING
MODE button to select the manual tuning
mode.
The "PRESET" indicator disappears from the
display.
This button is used to change the tuning mode.
4
Select the station you want to listen to (auto
selection).
Hold down the TUNING/PRESET button for more
than 0.5 seconds.
When a station is tuned in, the tuning process will
stop automatically.
If you want to stop the tuning process, press the
TUNING/PRESET button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the TUNING/PRESET button is pressed
momentarily (0.5 second or less), the frequency
changes by a fixed step.
FM: 50 kHz steps, AM: 9 kHz steps
Press the TUNING/PRESET button repeatedly until
the station you want to listen to is found.
< "ST" is displayed when a stereo broadcast is tuned
in.
< "Tuned" is displayed when a broadcast is correctly
tuned in.
FM MODE Button
Pressing this button alternates between Stereo
mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
ST indicator lights in the display.
Mono
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.
ENGLISH