Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TAWM SERIES
STD
SLIM
BATTERY TYPE SELECTION
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP
/DOWN
buttons to highlight BATTERY TYPE selection then press
ENTER
button.
2. BATTERY TYPE screen is displayed.
3. Use UP
/DOWN
buttons to select the type of battery being used.
4. Press ENTER
button to accept selection and exit to Settings menu.
Note: Wrench is configured for Alkaline battery shipped from factory. If Alkaline battery is replaced
with rechargeable Nickel-Metal Hydride (NIMH) or lithium, battery type should be changed so battery
level icon and LOW battery warnings function optimally. Battery life (REPLACE) will not be impacted,
however 50% and Low will be optimized to show most accurate linear discharge time.
Publicidad
Tabla de contenido
