skilsaw SPT5007-EA Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ATTACHING THE FRONT PART
Ensure that the wave washer and the sealing
ring are properly seated on the front locking
bolt (Fig . 8a) .
Thread the front locking bolt into the opening
of the front knob on the early entry attach-
ment (Fig . 8c) .
Align the front locking bolt with its mounting
opening in the saw and first tighten the bolt
by hand, then further tighten 1/2 turn using
T25 torx bit (Fig.8b). Do not overtighten.
Assembly
FIG. 8a
FIG. 8b
Front
locking bolt
FIG. 8c
Front
locking
bolt
-10-
Wave washer
Sealing ring
Front knob
Mounting
opening

Publicidad

Tabla de contenido
loading

Tabla de contenido