skilsaw SPT5007-EA Manual De Instrucciones página 7

ATTACHING THE TORSION SPRING
ASSEMBLY
1 . Unfold the handle:
a . Press the middle control knob (Fig . 5a) .
b . Unfold the upper part of the handle 180°
as shown in Fig . 5a until it audibly locks in
place .
c . Press the lower control knob (Fig . 5a)
d . Unfold the lower part of the handle as
shown in Fig . 5a until it audibly locks in place .
e . The saw should look as shown in Fig . 5b .
Assembly
FIG. 5a
d
Middle control knob Lower control knob
FIG. 5b
-7-
a
b
c