Oil Feeding And Mixing - Maruyama MS75 Manual Del Propietario U Operador

Oil feeding and mixing

Oil feeding
・Make sure you use Fuel and oil mixture
Gasoline
50
Use exclusive oil for two-cycle air cooled engines.
Neither overfill nor spill the fuel on to the engine.
DANGER
There is a possibility of fuel igniting. Make sure
you observe the following items.
・When filling fuel, stop the engine and
ensure no source of fire such as cigarette is
close to the area.
・Don't spill fuel. If fuel is spilled, wipe it all off
at once and start the engine after it is dry.
・Don't fill fuel above the standard line. There
is the possibility of leakage.
・When a fuel leakage is found, use the
engine after repairs are done.
・After filling fuel, make sure you close the
fuel tank cap.
: exclusive oil
: 1
CAUTION
・If operating the machine with gasoline
alone, the engine will seize.
・Make sure to mix exclusive two-cycle engine
oil in the specified quantity.
・The mixing ratio shall be the designated
ratio for exclusive two-cycle engine oil.
・Use lead-free gasoline for automobiles for
fuel.
Mixing chemicals
・Read the instructions for the chemical to be
used carefully and follow the mixing method
and cautions for use.
Cover of chemical tank
・After confirming packing for chemical cover,
close the cover securely. Otherwise, chemicals
will spill and you might be covered with them
when you carry the machine on your back.
16
Close securely
English