Description; Starter Wiring; Structure Of The Device - Festo 8109369 Manual De Utilización

9 Description

The EduTrainer ® Starter is designed for activation of a slip ring motor.
The device can be used to start a slip ring motor either with the step switch or with an external circuit.

9.1 Starter wiring

To achieve a startup phase with high torque (
number of different resistors during startup, according to its rpm.

9.2 Structure of the device

Equivalent circuit diagram of EduTrainer
© Festo Didactic 8109371
τ
= torque), the rotor of the slip ring motor is connected to
®
The device contains 3 x 20 Ω tubular
resistors, each with 2 sub-pickoffs at 2.5
Ω and 10 Ω.
Starter EduTrainer
®
35