Start Using Step Switch: Manual Starting Procedure - Festo 8109369 Manual De Utilización

10.1 Start using step switch: manual starting procedure

For studies of the slip ring motor on the servo brake and drive system TP1410,
the EduTrainer Starter is equipped with a step switch.
®
-S1 switch Resistor
position
0 ∞ (NC)
20 Ω
1
10 Ω
2
2.5 Ω
3
0 Ω
4
© Festo Didactic 8109371
a) Connect the motor terminals K, L, and M to the corresponding contacts
on the EduTrainer ® Starter.
b) Set the step switch to the desired starting position.
c) Start your experiment with the motor
Starter EduTrainer
®
37