Sony HT-SS370 Guía De Instalación Rápida página 42

When the System Audio Control function is
active, and the output method changes from
the TV speaker to the speakers connected to
the receiver automatically, loud sound may be
output depending on the volume level of the
receiver. You can prevent this by limiting the
maximum volume level.
1
Press AMP MENU.
"LEVEL" appears on the display.
2
Press
+,+
repeatedly until "SET
HOMI" appears, then press
8
or •.
3
Press
+'+
repeatedly until "VOL
LIMIT" appears, then press
8
or •.
4
Press
+,+
repeatedly to select
the maximum volume level you
want, then press
8.
The maximum volume level changes as
follows:
LIMIT MAX
+-+
LIMIT 49
+-+
LIMIT
48
+-+ +-+
LIMIT 2
+-+
LIMIT 1
+-+
LIMIT MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function· is available only when the Control
for HDMI function is set to on.
• This function is not available when the output
. method changes from the speakers connected to the
receiver to the TV speaker.
42
us
Tips
• Sony recommends that you set the maximum
volume level to a little lower than the volume you
usually listen to.
• Regardless of the maximum volume level you set,
the MASTER VOLUME on the receiver and the
MASTER VOL +/- on the remote are operable.
·If you do not want to limit the maximum volume
level, select "LIMIT MAX".