Audio Drc - Sony HT-SS370 Guía De Instalación Rápida

You can adjust the tonal quality (bass and
treble level) of the speakers.
• BASS
• TREBLE
»
Q.
<
D)
::::J
n
CD
Q.
en
a
::::J
cc
t/)
•
To adjust the tone level
1
Press
+/+
repeatedly until "BASS" or
"TREBLE" appears, then press
CD
or •.
2
Press
+/+
repeatedly until bass or
treble level appears, then press
CD.
You can adjust from -6.0 dB to +6.0 dB in
0.5 dB steps.
You can make the settings for the audio to suit
your preference.
• AN SYNC
You can delay the sound output using this
function when the image is slower than the
sound.
• SYNC OFF: Does not adjust.
• SYNC 1 - 20: Adjusts from 1 (10 ms) to 20
(200 ms) in 1 (10 ms) steps.
Notes
• You may not be able to adjust the delay between
sound and image perfectly using this function.
• This function is useful only for Dolby Digital, DTS
and Linear PCM (2ch) input by optical and coaxial
audio input signals.
• DUAL MONO
You can select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• MAIN: Outputs sound of the main language.
• SUB: Outputs sound of the sub language.
• MAIN / SUB: Outputs sound of the main
language through the front left speaker and
sound of the sub language through the front
right speaker simultaneously.
6
Repeat step 4 and 5 to adjust
the other speaker level.
7
After you have finished making
adjustments, press
+/+
repeatedly until "TEST TONE"
appears, then press
G)
or
+.
8
Press
+/+
repeatedly until
"T. TONE OFF" appears, then
press
G).
Note
The test tone signals are not output from the HDMI
OUT jack.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
• AUDIO DRC
You can compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volume. AUDIO
DRC only applies to Dolby Digital sources.
• DRC OFF: Does not compress dynamic
range.
• DRC STD: Compress dynamic range as
intended by the recording engineer.
• DRC MAX: Compress dynamic range fully.
Tip
Audio dynamic range compression lets you
compress the dynamic range of the soundtrack based
on the dynamic range information included in the
Dolby Digital signal.
"DRC STD" is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the "DRC MAX" setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
conffnued----------
61
us