Table 2: Supported transducers
Description
C11x transducer
rC60xi transducer standard/armored
HFL38xi transducer standard/armored
HFL50x transducer
HSL25x transducer
ICTx transducer
L25x transducer
L38xi transducer standard/armored
L52x transducer
P10x transducer
P11x transducer
rP19x transducer standard/armored
For transducers, the maximum cable length is measured between the strain reliefs. The stated length does not
include the lengths of cable in the following locations: underneath the strain reliefs, inside the transducer enclosure,
and inside the transducer connector.
Glossary (SonoSite Edge II)
The IMT term has been removed from the SonoSite Edge II user guide abbreviation list; the revision will be
made in the next update.
Supported transducers (SonoSite SII)
Maximum Cable Length
6.0 ft/1.8 m
5.5 ft/1.7 m
5.5 ft/1.7 m
5.7 ft/1.7 m
8.0 ft/2.4 m
5.5 ft/1.7 m
7.5 ft/2.3 m
5.5 ft/1.7 m
7.9 ft/2.4 m
6.0 ft/1.8 m
6.5 ft/2.0 m
6.0 ft/1.8 m
5