Playback
Playing Discs
Depending on the disc, some operations
may be different or restricted. Refer to the
operating instructions supplied with the
disc.
Charge the battery in advance or connect
the AC adaptor.
OPEN
PUSH
CLOSE
PUSH CLOSE
OPERATE
1
Open the LCD panel.
2
Slide the OPERATE switch to
"ON."
The player turns on and the POWER
indicator lights up in green.
3
Press OPEN to open the disc lid.
N
INPUT SELECT
DISPLAY
MENU
X
ENTER
x
RETURN
OPTIONS
VOLUME
OPEN
OPERATE
OFF
ON
HOLD
4
Insert the disc.
Place with the playback side down and
push gently until it clicks. Do not
touch the lens surface.
Lens surface
5
Push the PUSH CLOSE on the
disc lid to shut the disc lid.
6
Press N.
The player starts playback.
Depending on the disc, a menu may
appear. Press C/X/x/c to select the
item, and press ENTER.
b
• Discs created on DVD recorders must be
correctly finalised to play on the player. For
more information about finalising, refer to the
operating instructions supplied with the DVD
recorder.
• The disc may be still spinning when the disc lid
is opened. Wait until the spinning stops before
removing the disc.
Notes on the screen saver
• A screen saver image appears when you
leave the player in pause or stop mode
without operation for more than 15
minutes. The image disappears when you
press N. For the setup of "Screen
Saver," see page 17.
Playback side
facing down
,continued
11
GB