Installation; Zero" Suction - DAB NOVA UP MAE 300 Instrucciones De Instalación Y Mantenimiento

which may alter the characteristics of the water, in the case of
pure water, if the pump were to have any leaks.

6. INSTALLATION

larly dirty, a support should be provided on which to place the
pump so as to avoid blocking of the suction grid.
Figure 3
30 mm, to avoid the decrease of pump performance and the
possibility of blocking.
housed are as in the following table:
-
Model
NOVA UP MAE 300
NOVA UP MAE 600
quantity of water arriving and to the flow of the pump, so as not
to subject the motor to excessive starts
The pump must be installed in vertical position!

6.1 "Zero" Suction

In models where it is allowed, it is possible to reduce the minimum
Base dimensions Height (mm)
(mm)
400x400 560
400x400 600
GB
ENGLISH
23