Inserting And Removing; Operating Your Hearing Instrument - Optional Features; Programmable And Exchangeable Controls - Siemens Ace micon Guia Del Usuario

Inserting and removing

To insert the hearing instrument, make sure it is turned off by
opening the battery compartment to the first stop. Hold the
receiver with the dome or earmold between your thumb and
index finger and insert it carefully into the ear canal (Fig. 12).
Fig. 12: Inserting the instrument
You may find it helpful to pull your ear slightly upward or
backward when inserting your instrument. Then place the
instrument behind your ear and turn it on, by completely closing
the battery compartment.
To remove your hearing instrument, hold the receiver unit
between your thumb and index finger and carefully pull it out.
12
All manuals and user guides at all-guides.com
Operating Your Hearing
Instrument – Optional Features
Options and
Features
Programs
Fig. 13: FEATURE CARD
Options and Features section circled

Programmable and Exchangeable Controls

With the controls you can, for example, adjust the volume or
switch hearing programs. Your hearing instruments either have a
push button or a rocker switch – or no control at all.
Your Hearing Care Professional has has assigned your
desired functions to the controls, and has marked their functions
on your feature card.
Rocker Switch – If your rocker switch is configured as a volume
control pushing it up makes the volume louder. Pushing it down
makes the volume softer.
Your Siemens hearing instrument may have several memories,
also called hearing programs.
If your Rocker Switch is configured as a Program Button then
Refer to the feature card
included with this manual
to determine the optional
features your hearing
instrument is equipped
with (Fig. 13).
13