Goodyear GY 13RT Manual De Usuario página 49

English • Owner´s manual
ATTENTION
When the reversing walking tractor model is used with a frontal implement, the gear change control will
be inverted since the handle-bar will have been turned through 180° and owing to the reversing lever
which will then invert all the ratios.
ATTENTION
A safety device prevents the reverse gear from being engaged when the PTO is engaged.
If the machine is the reversing type, engagement will not take place when work is being carried out with
either the rotary hoe or frontal mowing bar.
2) PTO mode selector lever
This lever has three positions:
ATTENTION
When the machine is the reversing model and a frontal implement is used, the PTO control will be inver-
ted since the handle-bar will have been turned through 180° (see Fig. 2 Sticker on the panel).
3) Clutch pedal (Fig. 1)
- Pull the lever = clutch disengaged.
- Release the lever = clutch disengaged.
4) Motorstop control lever (Fig. 1).
- Lever depressed = engine operating.
- Lever released = engine stopped.
5) Diff lock control lever (Fig. 3)
The diff lock must be engaged when
one or two wheels of the walking
tractor tend to slip on the ground or
when the machine must be used in a
straight direction. The diff lock links
the two wheels and prevents them
from moving independently.
Fig. 2 - Sticker on the handle-bar panel showing
the gearshift and PTO engaging layout.
SYNCHRONIZED
NEUTRAL
INDEPENDENT
Fig. 3 - Diff lock control
lever and brake lever.
49