Wet Vacuum Cleaning; Shutting Down - Kärcher FLEX S 36 M Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47

Wet vacuum cleaning

Inserting the rubber lips
! Remove the brush strips (1).
! Insert the rubber lips (2).
Note
The structured side of the rubber lips must
point to the outside.
! Remove the paper filter bag.
! Plug in the mains plug.
! Turn the appliance on and put it into ope-
ration.
Warning
– The flat folded filter must never be remo-
ved during the vacuuming.
– If the appliance is used to vacuum wet
dirt the paper filter bag or the membrane
filter (special accessory) must always be
removed. It is recommended to use a
special filter bag (wet) (see Filter sy-
stems).
1
2 2
– In case of non-conductive liquids (such
as emulsion drilling fluids, oils, and grea-
ses) the appliance is not turned off when
the container is full. The filling level must
be continuously monitored and the con-
tainer must be emptied in time.
Deactivating "filter free"
OFF
! Set the slide to the top position.
Note
– If wet dirt is vacuumed with the upholste-
ry or crevice nozzle or if water is sucked
up from a container it is recommended to
deactivate the "filter free" function.
– If the maximum liquid level is achieved
the appliance is turned off automatically.
– Switch off the appliance and empty the
container.
– After having completed the wet vacuum
operation clean the flat folded filter, the
electrodes and the container and let dry.

Shutting down

! Empty the dirt container.
! Vacuum and wipe the appliance inside
and outside.
! Place the appliance in a dry room and
secure it from unauthorised use.
English 15

Publicidad

Tabla de contenido
loading

Tabla de contenido