Preventing Sound From Skipping (Esp) - Sony ZS-X3CP Manual De Instrucciones

Creating your own programme
(Programme Play) (continued)
Tips
• You can play the same programme again, since
the programme is saved until you open the CD
compartment.
• The resume function doesn't work during
Programme Play.
GB
14
Preventing sound from
skipping
(ESP)
The ESP (Electronic Shock Protection)
function prevents the sound from skipping
by using a buffer memory that stores music
data for about 10 seconds.
OPERATE
1
Press OPERATE to turn on the player.
2
Press x.
"CD" appears in the display.
3
Press ESP.
The ESP indication appears in the display.
To cancel the ESP function
Press ESP again.
Notes
• Playing may stop when the player gets a strong
shock even with the ESP function on.
• You may hear a noise or sound skip:
– when you listen to a dirty or scratched CD.
– when you listen to an audio test CD.
– when the player receives continuous shock.
• Sound may drop for a while if you press ESP
during play.
Tips
• When an MP3 CD is playing, the ESP function
is always activated due to a special character of
MP3 files. For this reason, you cannot cancel the
ESP function by pressing the ESP button.
• To enjoy the high quality sound of an audio CD,
we recommend that you cancel the ESP function.
ESP x