Setting Up; Choosing The Power Sources - Sony ZS-X3CP Manual De Instrucciones

Setting Up

Choosing the power sources

You can use the AC power or batteries as a power source.
1
Connecting the AC power adaptor
Insert one end of the supplied AC
power adaptor to the DC IN 9V socket
located on the side of the player, and the
other end to the wall outlet.
Note
Use only the supplied AC power adaptor. Do not
use any other AC power adaptor.
Polarity of the plug
GB
18
2
Battery compartment
To a wall outlet
DC IN 9V
1
DC IN 9V
Changing the MW tuning interval
If you need to change the MW tuning
interval, do the following:
1 Press BAND•AUTO PRESET until
"MW" is displayed.
2 Press ENTER for 2 seconds.
3 Press BAND•AUTO PRESET for 2
seconds.
"MW9" or "MW10" flashes.
4 Push the jog lever toward PRESET j or
PRESET J to select "MW9" for 9 kHz
interval or "MW10" for 10 kHz interval.
5 Press ENTER.
After changing the tuning interval, you need
to reset your preset MW radio stations.