Safety Regulations; Correct Use; Warnings - MSA V-TEC io1 Instrucciones De Uso

1 Safety Regulations

1 Safety Regulations
1.1

Correct Use

The V-TEC io1 is intended for use as part of a complete personal fall protection system.
The V-TEC io1 is intended to provide audible and visual feedback to users, relaying the connection status of their personal
protective equipment (PPE).
The V-TEC io1 is intended for use on Order Picker-type Powered Industrial Trucks (PITs) with overhead-mounted personal fall
limiters (PFLs).
WARNING!
Use in applications other than overhead-mounted on an Order Picker-type PIT may result in the io1 remaining asleep and not
alarming. Do NOT use in other applications.
Failure to follow this warning can result in serious personal injury or death.
1.2

Warnings

WARNING!
• Device is not Intrinsically Safe. Do NOT use this device in flammable or explosive environments.
• Use the io1 only with the MSA V-TEC PFL and an MSA harness with the RFID tag installed. Do NOT attach to other
products.
• Read the V-TEC PFL manual, P/N 63011-96, for instructions and warnings on use of the V-TEC PFL to which the io1 is
connected.
• Do NOT alter this equipment or intentionally misuse it. Do NOT use fall protection equipment for purposes other than those
for which it was designed. Do NOT use fall protection equipment for towing, hoisting, or material handling.
• Only MSA or persons or entities with written authorization from the manufacturer may make repairs to the V-TEC io1
system. No unauthorized repairs, modifications, alterations, and/or additions are permitted.
• The V-TEC io1 system is only to be used for its intended purpose and within its limitations. Further clarification can be
obtained from MSA.
• The io1 must be protected from sharp edges, abrasive surfaces, fire, acids, caustic solutions, or temperatures outside the
range -40 °C to 54 °C (-40 °F to 130 °F).
• Do NOT rely on feel or sound to verify proper snaphook or carabiner engagement. Do NOT rely on cessation or absence of
an alarm to verify proper snaphook or carabiner engagement. Ensure that gate and keeper are closed before use.
• If the V-TEC io1 system is damaged or is subjected to fall arrest forces or impact forces, it must be immediately removed
from service and marked as "UNUSABLE" until it has been destroyed.
• If PPE is resold, it is essential that instructions for use, maintenance, and periodic examination are provided in the
language of destination.
• Do NOT interfere with or obstruct the alarm lights and sounds.
Failure to follow these warnings can result in serious personal injury or death.
4
US