Electrical Specifications; Installation; Installing The V-Tec Io1 - MSA V-TEC io1 Instrucciones De Uso

4 Installation

3.2

Electrical Specifications

Component Specification
24V Converter Input Range:
Output Voltage:
Output Current:
Output Connection
Type:
Operating
Temperature:
Compliance:
Certifications:
USB A to Micro-B Interface:
Adapter
Connector 1:
Connector 2:
Power Pack Outputs:
Inputs:
Weight:
Dimensions:
10' USB Cable Interface:
Connector 1:
Connector 2:
io1 Input:
Battery Capacity:
Charge Current:
Charge Threshold:
For PFL, Rescue, Training, and Inspection content related to the lanyard itself, please reference included PFL manual, MSA
P/N 63011-96.
4 Installation
4.1

Installing the V-TEC io1

WARNING!
• Before wiring the V-TEC io1, disconnect power from the PIT.
• Install wiring in accordance with the electrical code of the country in use, the local authority having jurisdiction, and these
installation instructions, as applicable.
Failure to follow these warnings can result in serious personal injury or death.
8
8V - 40V DC via 16AWG wires
5V DC
2.5A max
Female USB Type A
-10°C to +70°C
Meets SAE J-1113, Integrated Short Circuit Protection
FCC, Industry Canada, CE, WEEE, RCM, e-Mark and RoHs Compliant USB 2.0
BC 1.2 DCP Support
USB 2.0
USB Type Micro-B Male
USB Type-A Mal
USB-A / 1A and 2.1A
USB Micro
8.2 oz
5.16 x 2.76 x 0.59 inches
USB 3.0/3.1 Gen 1 (5 Gb/s)
USB Type-C Male
USB Type-A Male
USB C 5V
350mAh LiPo/nom. 3.7V
150mA
35mA
US