ACCESSORIES
INCLUDED WITH THE
MACHINE
- Rim grippers
The locking grips, when fixed firmly to the
rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and
keep it in position.
- Bead lifting lever
The bead lifting lever keeps the bead in
position on the tool when demounting ag-
riculture wheels.
- Side ring lever
The side ring lever is used to make it easier to
remove the side rings from the earthmoving
wheels that use them.
- Grease gun
The grease gun is used for the monthly
greasing recommended for all moving ma-
chine parts.
OPTIONAL
ACCESSORIES
SUPPLIED ON REQUEST
Please refer to the relevant accessories
catalogue.
44
SPECIFIED
CONDITIONS OF USE
The tyre changer was designed exclusively for
tyre mounting and demounting.
WARNING
Any other operations carried out on the
machine are considered as improper use and
shall be construed as negligence.
DANGER
The manufacturer does not intend the ma-
chine to be used for inflation operations. If the
operator decides to proceed with partial bead
insertion in the tyre on the machine using his
own equipment, a pressure of 0.5 bar must
NOT be exceeded (unless the tyre manufac-
turer does require lower pressure levels), as
indicated in the UNI Standard 10588.
WARNING
When working with the machine it is strongly
recommended NOT TO USE equipment or
tools not manufactured by the manufacturer.
Figure 8 shows positions of the operator during
the various work phases.
These positions are referred to in the user
instructions
D
- E
nglIsh
A
B
C
8
- User Manual TB125