Reset Shop; Customising The Input Settings; Using Electronic Programme Guide; Pvr (Personal Video Recorder) - JVC LT-40HW62U Manual Del Usuario

- Before you connect the USB drive to the TV,
make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
- We recommend you use a USB drive with free
capacity above 1GB and disk speed faster than
5.0MB/sec.
- The bigger the USB drive free memory for time
shift, the bigger the recording length.
- If you change the channel in time shift mode, a
message prompts you to select Yes or No. You
can select Yes to exit the time shift function and
execute the channel change.

Reset shop

Allows you to reset the TV to factory default settings.
1. Press MENU on the remote control and select
Settings > Setup, then press OK to confirm.
2. Select Reset shop and press OK/► to enter.
3. Use the alphanumeric buttons to enter the
password.
Note: The super password is 0423. If you forget
your code, enter the super password to
override any existing codes.
4. Press ◄/► to select OK and press OK to confirm.
5. The Initial setup menu appears. Follow the
related instructions.

Customising the input settings

You can configure your TV according to the
equipment you connect to it.
1. Press MENU on the remote control and select
Settings > Setup > Input settings.
2. Press OK/► to enter Input settings.
3. Press ▲/▼ to select a connector your equipment
is connected to.
4. Press ◄/► to select the type of apparatus
attached to this connector.
5. Press MENU to return to the Setup menu.
After configuring, the selected source label will be
displayed after the name of the related connector in
the source list when pressing SOURCE on the remote
control or OK on the TV set.

Using Electronic programme guide

EPG is an on-screen guide that displays scheduled
TV programmes. You can navigate, select, view and
record programmes.
1. Press GUIDE on the remote control, the Now
and Next EPG menu will appear, which allows
you to get information about the current or next
programme playing on each channel. Navigate
through the different programmes using the
navigation buttons on the remote control.
2. Use the colour buttons to view the 8 Days EPG.
- Prev day (Red): Lists the previous day's EPG.
- Next day (Green): Lists the next day's EPG.
- View detail (Yellow): Displays the description of
this programme if available.
- Type filter (Blue): Programme guide filter for
digital TV programmes.
• Press the blue button to display the
programmes' type and subtype lists.
• Navigate through the different types and
subtypes using the navigation buttons on the
remote control.
• Select one or more types, which you want to
highlight from the Type list, press OK to select
(or deselect). A checkmark will appear to
the left of the type when selected. When you
select a type, all its subtypes will be selected
automatically.
• Also, you can select some desired subtypes
without selecting any type first.
• Press the blue button to exit the type and
subtype list.
• After filtering, all your desired digital TV
programmes will be highlighted.
- Add schedule (Option): Press OPTION on the
remote control to bring up the Schedule list
menu. For details on scheduled recording, refer
to the Schedule list section.
3. Press GUIDE/EXIT to exit the EPG and switch to
the selected channel.

PVR (Personal Video Recorder)

Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to
the set first. When using this function for the first time,
you should setup the disk for the USB device.
Note: This feature is available only in selected
products and, due to specific TV
network limitations and country technical
requirements, might not be available in
product or place of installation. This feature
might also be blocked by TV network due to
copyright protection (HD content, recording
protection). Please use OPTION on the
remote control to check if this feature is
available in your product.
1. Press OPTION on the remote control and in the
Quick access menu, select PVR.
2. Press OK/► to enter.
3. Press:
- the recording button to start recording, the record
file is put into a folder named after the channel
number under the PVR folder in Media > Video;
- ▲/▼/◄/► to adjust the recording duration.
- the green or Stop button
manually; in normal operation, the recording will
stop automatically when the recording duration
has passed.
EN 15
Using more of your TV
to stop recording