Sensing Range Setting; Time Function Setting - SICK WSE16 Manual Del Usuario

7
COMMISSIONING
7.3

Sensing range setting

en
7.4

Time function setting

28 O P E R A T I N G I N S T R U C T I O N S | WSE16
Table 16: Application conditions
Function reserve
1,000
WSE16P-xxxxx1xx, WSE16I-xxxxx1xx
100
10
1
0 10 20 30
(0.39) (0.79) (1.18)
Figure 12: Characteristic line 1
WSE16x-xxxxxx3xAxx with teach-in button:
There must not be any objects located between sender and receiver. The sensitivity
is reduced by pressing the teach-in button (approx. 1-3 sec.). This can reduce mutual
interference between the sensors. The sensing range is also reduced, and therefore the
operating reserve as well. Lead an object into the path of the beam. The yellow LED
goes out, meaning the object is detected and the setting is correct.
WEO
1
1...3 sec.
2
Figure 14: WSE16x-xxxxxx3xAxx, adjusting the sensing range with teach-in button
1
1
0
0 10
(32.81)
Sensing range
Figure 13: Bar graph 1
40 50
(1.57) (1.97)
Distance in m (feet)
WSO
30 45
20 30 40 50
(65.62) (98.43) (131.23) (164.04)
Distance in m (feet)
Sensing range typ. max.
8020353.1DS6/2021-11-24 | SICK
Subject to change without notice