Descargar Imprimir esta página

Baby auto JET FIX 23 Instrucciones página 10

Publicidad

5. The safety of the seat can only be guaranteed by the manufacturer if it issued by the
original owner.
6. Ensure that all luggage and objects likely to cause injury in the event of an accident are
properly secured.
7. The moving parts of the car seat should not be lubricated in any way.
8. The baby car seat must not be used without the cover. Please use an original cover, as
the cover contributes to the safety of the seat.
9. The seat must be secured with a seat belt or ISOCLICK FIX, even when it not on use. An
unsecured seat may injure other passengers in the car in an urgent stop.
10. The rigid items and plastic parts of a child restraint must be so located and installed that
they are not liable, during everyday.
11. Ensure that the seat is not damaged by the webbing between or underneath heavy
luggage, adjustable seats or slamming the car door etc.
12. No alterations may be made to the product as this could affect part or the overall safety
of the seat. Please, follow carefully the installation instructios supplied by the child seat
manufacturer otherwise it could be dangerous for the child.
13. In hot weather the plastic and metal parts of the product will be hot. You should cover
the seat when the car parked under the sun.
14. In order to prevent damage to the cover, do not remove the product's logo.
15. Use the seat even in a short journey, as this is when most accidents occur.
16. Before the purchase, please check that the seat is properly in your car.
17. Take a short break in long journey. So that your child has some time for the relaxation.
18. Set a good example yourself and always wear your seat belt.
19. Tell your child that he/she should be never play with the harness buckle.
20. The figures on this manual are made to illustrate the text. The child seat may differ from
figures. Those differences will not affect neither safety nor installation procedure.
21. This car seat is designed to offer the optimal safety in all installation modes described in
this manual.
22. Any straps holding the restraint to the vehicle should be tight, that any straps restraining
the child should be adjusted to the child's body, and that straps should not be twisted.
23. Ensure that any lap strap is worn low down, so that the pelvis is firmly engaged, shall be
stressed.
24. If you have any doubts or queries regarding the use or placement of this product or you
need any replacement elements, please contact our Customer Services Department.
25. Fitting the child with warm clothing into this safety seat may reduce the effectiveness
of the restraint system.
10

Publicidad

loading

Este manual también es adecuado para:

Ds-17